Doosan Hydraulic Pump Dealer and Supplier in Gujarat

When a Doosan excavator starts showing weak digging performance, slow hydraulic movements, excessive pump noise, overheating, or inconsistent pressure, the hydraulic main pump becomes one of the first components that needs investigation. For customers searching for a Doosan Hydraulic Pump Dealer and Supplier in Gujarat, Multitech India provides hydraulic pump sourcing and related hydraulic component support for construction, excavation, quarrying, infrastructure, and industrial equipment.

Buyers operating machinery in Ahmedabad and Vadodara can share the Doosan excavator model, pump identification plate, machine serial number, and photographs to help identify the appropriate pump configuration. This is particularly important because the same excavator family can have different hydraulic pump specifications across production generations.

Doosan Hydraulic Pump Supplier in Gujarat

A Doosan excavator depends on its hydraulic pump to generate the flow and pressure required for boom, arm, bucket, travel, and swing functions. When pump efficiency decreases, the operator may notice slower cycle times, reduced digging force, pressure fluctuations, abnormal sounds, or increased hydraulic oil temperature.

Customers in Surat and Rajkot looking for a Doosan hydraulic pump supplier can approach Multitech India with the original pump details. Depending on the inspection requirement, the solution may involve a complete pump assembly, replacement pump, rotating group, valve plate, regulator, seal components, or other hydraulic parts.

Doosan Hydraulic Pump Dealer for Excavators

Doosan has produced excavators across several operating classes, from comparatively compact machines to heavy-duty crawler excavators. Consequently, pump selection should be based on the actual hydraulic configuration rather than simply searching for a pump according to excavator tonnage.

For equipment owners in Jamnagar and Bhavnagar, Multitech India can assist with Doosan hydraulic pump identification and sourcing. Hydraulic references document Kawasaki K3V, K5V and K7V pump families across various Doosan applications, while some smaller machines can use other pump manufacturers.

Doosan Hydraulic Pump Models and Hydraulic Pump Families

Doosan excavator hydraulic systems can use different Kawasaki axial-piston pump families depending on the machine and generation. Published application references associate Doosan machines with K3V63, K3V112, K3V140, K3V180 and K5V140 configurations, among others.

Common Doosan-related hydraulic pump model references include:

• K3V63

• K3V63DT

• K3V63DTP

• K3V112

• K3V112DT

• K3V112DTP

• K3V140

• K3V140DT

• K3V140DTP

• K3V180

• K3V180DT

• K3V180DTP

• K3V280

• K3V280DTH

• K5V80

• K5V80DT

• K5V140

• K5V140DT

• K5V140DTP

• K5V160

• K5V160DT

• K5V160DTP

• K5V160DTH

• K5V200

• K5V200DT

• K5V200DTP

• K5V200DTH

• K5V212

• K5V212DPH

• K7V63

• K7V125

• K7V140

• K7V160

• K7V180

• K7V280

These are pump-family references rather than a universal fitment list. Exact compatibility depends on the machine, production series, displacement, regulator, mounting arrangement, shaft configuration, and pump part number. For example, documented Doosan applications include K3V112 configurations on several DH and DX excavators and K5V140DTP on the DX300LC.

Doosan K3V63 Hydraulic Pump Applications

The K3V63 family is associated with smaller and earlier Doosan excavator applications. One documented application reference lists the Solar 130LC-V, Solar 150LC-V and Solar 155LC-V with a K3V63DT configuration.

For customers operating machinery around Morbi and Gandhinagar, the original pump should be checked before ordering a K3V63 replacement. Pump displacement alone does not establish complete compatibility because the control and mounting configuration can differ between machines.

Doosan K3V112 Hydraulic Pump for Medium Excavators

The K3V112 is a 112 cm³/rev axial-piston pump family widely documented in excavator applications. Hydraulic references associate it with Doosan models including DH170, DH215LC-9, DH220LC, DH220LC-7, DH225LC-7, DH225LC-9, DX220, DX225LC-3, DX225LCA, DX255LC-3, DX255LC-5 and DX258LC.

Customers from Anand and Nadiad searching for a Doosan K3V112 pump can send a photograph of the pump nameplate. A documented DX225LC application, for example, uses a K3V112DTP configuration, while other Doosan applications use K3V112DT variants.

Doosan DX225LC Hydraulic Pump

The DX225LC is a major Doosan crawler-excavator model in the approximately 22-tonne class. Pump references for DX225LC include the Kawasaki K3V112DTP family, with application references also identifying specific pump configurations and part numbers for different versions.

For contractors working around Mehsana and Vapi, Multitech India can assist with DX225LC hydraulic pump enquiries. Buyers should provide the exact DX225 designation, machine serial number, and pump plate before purchasing because DX225-series machines can have different configurations.

Doosan DX255LC Hydraulic Pump

The DX255LC requires careful pump identification because several hydraulic configurations and production versions exist. Application references associate DX255LC variants with K3V112-series pumps, including K3V112DTP configurations.

Customers in Bharuch and Vapi may encounter hydraulic problems such as reduced operating speed, weak digging force, unusual pump noise, or poor response during simultaneous functions. Before replacing the pump, the hydraulic circuit should be assessed to determine whether the pump itself or another component is responsible.

Doosan DX300LC Hydraulic Pump

The DX300LC represents a larger excavator class and is documented with the Kawasaki K5V140DTP hydraulic pump family. One application reference identifies a specific DX300LC pump configuration as K5V140DTP1N9R-9N07-V.

For equipment operating around Kutch and Gandhidham, sourcing a DX300LC pump should involve checking the complete original pump identification. The K5V140DTP is not simply interchangeable with every K5V140 variant because the detailed suffix can indicate differences in configuration.

Doosan Heavy Excavator Hydraulic Pumps

Larger Doosan crawler excavators require hydraulic systems capable of handling demanding excavation and earthmoving cycles. Doosan's hydraulic architecture uses electronic control systems to coordinate engine output and hydraulic operation on later machines.

For quarry and infrastructure equipment in Junagadh and Amreli, Multitech India can handle enquiries for larger Doosan hydraulic pump assemblies and related components. The buyer should provide the complete excavator model and pump identification rather than relying only on a generic “heavy excavator pump” description.

Doosan Hydraulic Pump for Quarry and Construction Machinery

Gujarat's construction, road-development, industrial, quarrying, and infrastructure activities create demand for excavators that can operate for extended working cycles. A hydraulic pump operating below its intended efficiency can affect overall productivity.

Customers around Bhuj and Palanpur can contact Multitech India for Doosan hydraulic pump requirements by sharing the machine's technical information. Where the original pump is available, photographs of the nameplate, regulator, ports, shaft side, and complete assembly can significantly improve identification.

Doosan Hydraulic Pump Replacement or Repair

A pump exhibiting poor performance does not automatically mean the entire assembly needs to be replaced. Internal wear, damaged valve plates, piston-group problems, regulator faults, shaft-seal leakage, contamination, or excessive case drain can require different corrective approaches.

For buyers in Navsari and Valsad, Multitech India can assist with enquiries for complete replacement pumps as well as related hydraulic components. The appropriate route depends on the pump's actual condition and the machine's hydraulic test results.

A proper pressure and flow assessment is particularly useful before approving a major pump replacement. It can help distinguish a pump problem from issues involving valves, pilot circuits, hydraulic oil, filters, relief settings, or other parts of the hydraulic system.

Doosan Hydraulic Pump Supplier for Gujarat Buyers

People searching online for Doosan hydraulic pump supplier in Gujarat, Doosan excavator hydraulic pump, Doosan DX225LC pump, Doosan DX300LC pump, or Doosan hydraulic pump replacement generally need model-specific information before purchasing.

Multitech India supports enquiries for Doosan hydraulic pumps and associated hydraulic equipment. Buyers can provide their machine details before requesting a quotation so the pump can be checked against the required configuration.

The relevant information includes the excavator model, serial number, pump model, OEM or pump part number, manufacturer marking, displacement, regulator arrangement, and photographs.

How to Identify the Correct Doosan Hydraulic Pump

Before purchasing a replacement, check the identification information on the existing pump. If the plate is damaged or unreadable, photographs of the entire pump and its mounting arrangement can still provide useful information.

The buyer should ideally provide:

• Doosan excavator model

• Machine serial number

• Existing hydraulic pump model

• Pump part number

• Manufacturer name

• Displacement

• Regulator/control designation

• Port arrangement

• Shaft and mounting details

• Clear photographs of the original pump

For example, one documented DX225LCA application identifies a K3V112DT pump with Doosan/OEM references including 400914-00212, 400914-00143, K1000698E and K1000698G. This illustrates why a buyer should provide the actual part number instead of relying only on the excavator model.

Realistic Doosan Hydraulic Pump Buyer Story

A civil-construction contractor working between Ahmedabad and Vadodara noticed that a Doosan excavator was taking longer than normal to complete its digging cycles. The operator reported weak performance when several hydraulic functions were operated together. Instead of immediately ordering a pump based only on the excavator model, the contractor photographed the existing pump, regulator and identification plate and shared the machine serial information with a hydraulic supplier.

The pump was then compared with the machine's hydraulic configuration. The contractor was advised to verify the pump model and associated part references before purchasing. After the required hydraulic pump solution was arranged, the excavator underwent installation checks and hydraulic testing before returning to regular work.

The experience highlights an important purchasing point for Gujarat equipment owners: the excavator model is only the starting point; the original pump's exact identification is essential for accurate replacement sourcing.

Doosan Hydraulic Pump Dealer and Supplier in Gujarat Support

Multitech India deals in industrial hydraulic equipment and supports requirements involving hydraulic pumps, motors, valves, replacement components, and related hydraulic solutions.

For Doosan equipment, customers can enquire about pump families including K3V63, K3V112, K3V140, K3V180, K5V140 and other documented configurations, subject to exact machine compatibility.

Whether the requirement is for a Doosan DX225LC hydraulic pump, DX255LC hydraulic pump, DX300LC hydraulic pump, older DH-series pump, Solar-series pump, or another Doosan hydraulic pump, the best starting point is to send the original pump identification and machine details.

Frequently Asked Questions

1. Who is the Doosan hydraulic pump dealer in Gujarat?

Multitech India supplies and sources Doosan hydraulic pumps and related hydraulic components for buyers across Gujarat. Share the machine and original pump details for identification.

2. Which hydraulic pump is used in a Doosan DX225LC?

Kawasaki K3V112-series configurations are documented for DX225LC applications, including K3V112DTP. Exact pump fitment should be confirmed from the machine and pump identification.

3. Can I get a Doosan DX300LC hydraulic pump in Gujarat?

Yes. Multitech India handles DX300LC hydraulic pump enquiries. K5V140DTP configurations are documented for the DX300LC, but the exact suffix and part number should be verified.

4. What details are required for a Doosan pump quotation?

Provide the excavator model, machine serial number, pump model, pump part number, manufacturer marking, and clear photographs. Regulator and mounting photos are also helpful.

5. Can an old Doosan hydraulic pump be repaired?

Depending on its condition, components such as piston groups, valve plates, bearings, seals, and regulators may be repairable or replaceable. Testing should determine the appropriate solution.

6. Does Multitech India supply Doosan pumps outside Ahmedabad?

Yes. Multitech India handles Doosan hydraulic pump enquiries from customers throughout Gujarat. Buyers can contact the company with their machine and pump identification details.

Conclusion

For buyers searching for a Doosan hydraulic pump dealer in Gujarat, accurate identification is more important than simply matching the excavator's model name. Doosan machines can use different hydraulic pump families and detailed configurations depending on the machine generation and specification.Kawasaki K3V, K5V and other pump configurations are documented across different Doosan excavator applications, including K3V112-related DX225 applications and K5V140DTP configurations for the DX300LC.Multitech India can assist Gujarat buyers with Doosan hydraulic pump sourcing and related hydraulic requirements. Send the machine model, serial number, original pump model, part number and photographs for a more accurate pump identification.